Zinc & Zinc-Nickel Plating for Boxes, Frames & Enclosures

Large-Part Plating With The Capacity To Handle Production Volumes

Large sheet-metal boxes, frames, cabinets, and housings can present unique plating challenges. Gatto combines large plating tanks, experience with complex fabricated assemblies, and high-volume production capacity to deliver consistent finishes and dependable turnaround times.

Request a Quote

Why Fabricated Frames & Enclosures Are Different

Zinc and zinc-nickel electroplating are not simple dipping processes where every surface touched by solution receives the same coating. Zinc deposition requires electrical current, and part geometry affects how evenly that current is distributed.

Exposed edges, corners, and exterior surfaces are high-current density areas, where plating builds more easily. Deep interior corners, recessed panels, and surfaces shielded by flanges or brackets are low- current density areas, where less current reaches the surface, making them harder to plate and may result in thinner coverage.

A part can receive adequate plating on its exterior surfaces while having thin, dark, uneven or missing coverage in recessed or shielded areas. This is an important consideration when specifying thickness requirements. 

 

Gatto’s Capabilities for Difficult Geometry

  • Large Plating Tanks: Our 27-foot zinc, and 12-foot zinc-nickel tanks, provide more flexibility for positioning, orienting, and racking oversized fabricated parts.

  • Specialized Racking & Auxiliary Anodes: Custom racking can help improve plating coverage in difficult areas. For critical interior coverage requirements, auxiliary anodes may be an option. (These are not part of our standard process and should be discussed during quoting.)

  • Production Capacity: Allows large, fabricated enclosures and frames to be processed at scale with consistent quality and competitive turnaround times.

  • Experience with Fabricated Assemblies: We carefully orient parts to help prevent trapped air and adjust plating bath parameters to improve coverage in low-current-density areas. Our experience also helps identify potential drainage and bleed-out issues before they become production problems.

 

Design Considerations That Can Improve Plating Results

Certain design features can affect plating coverage, drainage, and the risk of trapped chemicals. Addressing these details before fabrication can greatly reduce problems during plating.

Design Area What to Consider
Welds & Seams Porous or incomplete welds can allow plating solutions to enter tight crevices where they are difficult to rinse out, potentially causing bleed-out, staining, or corrosion.

Joined Components

When joints cannot be made fully liquid-tight, sufficient clearance between components should be provided to allow plating solutions and rinse water to flow through and drain properly. This will reduce the risk of trapped chemicals that can seep out later and cause delayed bleed-out.

Drainage & Venting

Drain and vent holes should account for how the part will hang during plating. Sealed tubing and enclosed pockets can trap solutions and prevent proper drainage.

Critical Coverage Areas

Identify interior surfaces, recesses, grounding/contact areas, or other locations where minimum coating thickness is important so appropriate plating and racking options can be evaluated early.

Involve Your Plater Early

Finishing is often considered after a component has already been designed and fabricated. For large or complex enclosures, early discussion can prevent costly surprises. Tank dimensions, rack orientation, weld design, drainage, interior geometry, and required coating areas can all affect what's practical.


Gatto cannot change the physics of electroplating, but our experience, large-part capabilities, and processing options can help identify challenges early and develop a practical approach.

Planning A Large Cabinet, Box, Or Housing That Requires Zinc Or Zinc-Nickel Plating? 

Share your part geometry, dimensions, production volume, and critical coating requirements with Gatto early in the process so we can help evaluate the plating approach.

Need Expert Guidance On Your Plating Project? Let’s talk.
Get a Fast, Accurate Quote

Family-Owned and Trusted by Manufacturers for Decades. We Deliver ISO- Certified Plating Backed By Deep Industry Knowledge. Tell Us What You Need, and We’ll Get Back To You Fast.

request a quote today
Why Teams Like Yours Work With Gatto
Centrally Located to Move Parts Faster

Located in Chicago, we reach 65% of the U.S. in a day, lowering freight costs, reducing lead times, and enabling direct shipping to your customer.

Built for Fast Turnaround

With 210,000 sq. ft., we process full truckload orders efficiently, keeping parts organized and on schedule with dedicated staging, processing, and tracking.

Experience That Solves Quality Issues

Flaking, bleed-out, poor adhesion, we catch plating issues early before they turn into costly problems.

We Make Plating Easy For You

From fast quotes to clear answers, we simplify the plating process so you can focus on the rest of your project.

Ready to get started?

Contact Our Plating Experts

Whether you know exactly what you need or just need to talk it through, we’re here to help with quick turnaround times and expert guidance.